Technical resources
Current Technical Data Sheets and Safety Data Sheets, with document numbers and revisions. Documents are listed only when published by ResinTech; where a product has no current document, the product page says so and offers an enquiry route.
| Product | Type | Document | Number · revision | Component | Download |
|---|---|---|---|---|---|
| TUE | SDS | ResinTech TUE — Safety Data Sheet | SDS TUE · See document | Part A / Part B | |
| HPP | SDS | ResinTech HPP — Safety Data Sheet (Canada / WHMIS) | SDS HPP v2.0 · Version 2.0, rev. 2026-07-07 | Part A / Part B | PDF · 10 pp |
| CBE | SDS | ResinTech CBE — Safety Data Sheet (Canada / WHMIS) | SDS CBE v1.0 · Version 1.0, rev. 2026-07-01 | Part A / Part B | PDF · 8 pp |
| TCU | TDS | ResinTech TCU — Technical Data Sheet | RT-TCU-TDS-2.3 · Rev 2.3 | A + B | PDF · 4 pp |
| TCU | SDS | ResinTech TCU — Safety Data Sheet (Canada / WHMIS) | RT-TCU-SDS-2.1 · Rev 2.1, February 2026 | Part A / Part B | PDF · 5 pp |
| FLEXCOAT-PU | TDS | ResinTech FLEXCOAT-PU (FPU) — Technical Data Sheet | TDS-FPU-1.0 · Rev 1.0 | Single component | PDF · 4 pp |
| FLEXCOAT-PU | SDS | ResinTech FLEXCOAT-PU — Safety Data Sheet (Canada / WHMIS) | SDS-FPU-1.0 · Issued June 2026 | Single component | PDF · 6 pp |
| PPM | TDS | ResinTech PPM — Technical Data Sheet | TDS-PPM v1.1 · v1.1 (supersedes v1.0) | Single component | PDF · 3 pp |
| PPM | SDS | ResinTech PPM — Safety Data Sheet (WHMIS 2015) | SDS PPM v1.0 · v1.0 | Single component | PDF · 5 pp |
| SLC | TDS | ResinTech SLC — Technical Data Sheet | SLC TDS v1.0 · Version 1.0, issued 28 June 2026 | Dry powder | PDF · 4 pp |
| SLC | SDS | ResinTech SLC — Safety Data Sheet (WHMIS 2015) | SLC SDS v1.0 · Version 1.0, issued 28 June 2026 | Dry powder | PDF · 5 pp |
Not yet listed
- CRU — the published TDS and SDS describe a previous kit configuration and are not listed; revised documents will be listed when issued. The systems design guide (Rev 1.12) contains a CRU column in its typical-properties table that belongs to the previous kit; the guide is withdrawn from download until updated and those figures are not reproduced on this site. Request current information.
- PPM-SL — no TDS or SDS has been published yet. Request information.
- TUE, HPP and CBE Technical Data Sheets (TDS-TUE-1.0, TDS-HPP-1.0, TDS-CBE-1.0) — temporarily withheld from download while their coverage tables are confirmed with ResinTech: the published ft²/US gal figures do not reconcile with the stated film builds (see the coverage notice on each product page). The originals are preserved unedited and will be re-listed when a revised sheet is issued. The Safety Data Sheets for these products remain available above. Request the current sheet.
- Traffic Coating Systems design guide (RT-TCSA-DG-1.12) — temporarily withdrawn from download while it is updated (its typical-properties table includes CRU figures from the previous kit). The build stacks, application matrix, site requirements and hold points it defines remain published on the systems pages, with the CRU-dependent items (CRU thicknesses, the EWS-X configuration, CRU pigmentation and substitution guidance) marked awaiting confirmation. An updated guide will be listed here when issued. Request the guide.
Reading the documents
- Values in the Technical Data Sheets are typical values at 23 °C and 50 % RH unless noted, and are not a guarantee of performance.
- Two-component products (TUE, CBE, HPP, TCU) have a Safety Data Sheet covering Part A and Part B in separate sections.
- SLC values are declared to JC/T 985-2017; ASTM methods shown in that document are equivalents for comparison only.
- Superseded 2024 documents that were hosted on this site now redirect from their original addresses to the current equivalent document or page.