ResinTech TUE Transparent Universal Epoxy (100% Solids)
Technical Documentation
Always confirm values against the current TDS and SDS before specifying or ordering.
ResinTech TUE is a 100% solids, two-component transparent universal epoxy for commercial and industrial concrete floor systems. It is used as a primer, reinforcement or build coat, and broadcast binder for flake, quartz, metallic, and solid-colour systems. It also serves as the premium epoxy layer in ResinTech traffic coating systems, where it may be substituted for CBE.
For UV-exposed or exterior applications, specify a compatible UV-stable aliphatic topcoat such as ResinTech HPP, TCU aliphatic urethane topcoat, or CRU chemical-resistant urethane topcoat, as required by the system design.
Product overview
| Field | Details |
|---|---|
| Brand | ResinTech |
| Product code | TUE |
| Product type | 100% solids transparent universal epoxy for primer, build, broadcast binder, and self-levelling applications |
| Kit / pack size | 15 L kit: Part A 10 L + Part B 5 L (4.0 US gal mixed) |
| Colour / finish | Clear, glossy with a slight satin sheen; field-pigmented when approved |
| System role | Premium epoxy reinforcement / build layer; may substitute for CBE |
A ResinTech alternative to Tremco Epoxy Primer
ResinTech TUE Transparent Universal Epoxy is stocked in North Vancouver and used in the same 100%-solids epoxy primer, bond-coat, and build applications. Product chemistry and system build differ between manufacturers, so confirm suitability against the current ResinTech TDS before substituting.
Tremco is a registered trademark of Tremco. It is used here for identification and comparison only; no affiliation or endorsement is implied.
Where TUE sits in the system
In ResinTech traffic systems—including PTS, VTS, and EWS—TUE is the premium epoxy reinforcement and build layer. It may be substituted for ResinTech CBE when a premium epoxy is preferred.
TUE is protected by an HPP UV-stable surface coat or a CRU premium finish. Where movement accommodation or waterproofing is required, ResinTech FLEXCOAT-PU is used as a flexible base membrane beneath the build. Confirm the complete system specification against current ResinTech documentation.
The full range of ResinTech floor coating systems is available through Canopus Supply.
Best-use applications
Confirm every application against the current ResinTech TUE Technical Data Sheet before specifying.
- Parkade decks and ramps
- Exposed balconies and podium slabs
- Commercial and industrial concrete floors
- Flake, quartz, metallic, and solid-colour broadcast systems
- Pedestrian walkways and stairwells
Product data
Source: ResinTech TUE Technical Data Sheet (TDS-TUE-1.0). Values are typical at 23 °C and 50% relative humidity unless noted. Confirm all values against the current TDS before specifying or ordering.
| Property | Typical value | Note |
|---|---|---|
| Components | Two — Part A resin + Part B hardener | Mix full kits where possible |
| Mix ratio | 2:1 by volume (Part A : Part B) | — |
| Solids content | 100% by weight | — |
| VOC | < 50 g/L | Effectively VOC-free for a 100% solids epoxy; confirm against the SDS |
| Appearance | Clear or pigmented | Clear resin may appear slightly amber in mass |
| Odour | Low | Use ventilation during application |
| Induction time | None | Apply immediately after proper mixing |
| Shelf life | 10 months | Unopened and stored properly at about 25 °C |
| Storage | Sealed, cool, dry, approximately 25 °C | Protect from freezing, heat, moisture, and direct sunlight |
Performance properties
These are typical values from the ResinTech TUE TDS. Actual results depend on the substrate, preparation, mixing, film build, and application conditions. Confirm all values against the current TDS.
| Property | Typical value | Test method / note |
|---|---|---|
| Bond strength to concrete | 370 psi | ASTM D4541; typically concrete cohesive failure |
| Tensile strength | 6,500 psi | ASTM D412 / D638 |
| Elongation | 6% | ASTM D412 / D638 |
| Abrasion resistance | 35 mg loss | ASTM D4060, CS-17 wheel, 1,000 g, 1,000 cycles; excellent for an epoxy |
| Shore hardness | 80 D | ASTM D2240 |
| Tack-free time | 10 hours | ASTM D1640 at 15 mils |
| Drying time | 20 hours at 15 mils | ASTM D1640, 24 °C / 50% RH |
| UV resistance | UV-resistant epoxy | Not a UV-stable aliphatic topcoat; use HPP or CRU for permanent unprotected UV exposure |
| Chemical resistance | Excellent | For severe chemical service, topcoat with CRU and confirm against the TDS |
Working time, recoat, and cure
Times vary with temperature, film build, and conditions. Large mixed volumes shorten pot life and can create heat. Confirm all times against the current TDS.
| Temperature | Pot life | Recoat window | Light foot traffic | Full cure |
|---|---|---|---|---|
| 10 °C | 60–75 min | 18–24 h | 36–48 h | Approximately 10 days |
| 21 °C | 40–60 min | 14–18 h | Approximately 24 h | Approximately 7 days |
| 30 °C | 20–30 min | 8–12 h | 12–18 h | 4–5 days |
If the surface is hard, glossy, or outside the recoat window, sand or abrade it, vacuum thoroughly, and clean it before recoating.
Coverage and film build
Coverage is listed per US gallon. A 15 L kit is approximately 4.0 US gal. Actual coverage varies with surface profile, porosity, film build, and application method. Confirm coverage against the current TDS.
| Use | Typical film / build | Typical coverage |
|---|---|---|
| Primer / base coat | 8–10 mils | 200–160 ft²/US gal |
| Top coat | 8–16 mils | 245–120 ft²/US gal, depending on profile and build |
| Broadcast receiver | 10–25 mils before broadcast | 145–80 ft²/US gal plus aggregate |
| Self-levelling build coat | 40–250 mils in controlled pours | By design and mass control |
Application conditions
Confirm every condition against the current ResinTech TDS and project specification before use.
| Condition | Requirement |
|---|---|
| Substrate temperature | 10–30 °C |
| Ambient temperature | 10–32 °C |
| Relative humidity | Maximum 85% recommended |
| Dew point | Substrate at least 3 °C above dew point |
| Concrete moisture | Dry concrete; typical screening limit 4% Tramex or 85% RH by ASTM F2170 |
| Concrete age | Normally 28 days unless the designer approves earlier work |
| Minimum concrete strength | 3,600 psi compressive and 220 psi tensile pull-off |
System compatibility
Confirm every system combination against the current ResinTech TDS and project specification before use.
| System layer | Compatible products |
|---|---|
| Flexible base for movement / “+” systems | ResinTech FLEXCOAT-PU flexible base membrane beneath the build; confirm against the TDS |
| Reinforcement / build | TUE may substitute for ResinTech CBE as the premium epoxy build layer; confirm against the TDS |
| Surface / topcoats | ResinTech HPP for a UV-stable polyaspartic surface, CRU for a premium chemical / UV finish, or TCU aliphatic urethane; confirm against the TDS |
| Not recommended for | Immersion service, or exterior and UV-exposed applications without a compatible UV-stable aliphatic topcoat; confirm against the TDS |
Application notes
Always confirm application requirements against the current TDS, SDS, and project specification before use.
Surface preparation
Concrete must be sound, clean, dry, and free of laitance, curing compounds, sealers, oil, grease, and bond breakers. Mechanically prepare to ICRI CSP 2–3 for thin coatings and CSP 3–4 for broadcast or traffic-duty work. Vacuum until dust is removed from the pores and profile; do not rely on acid etching for professional work.
Repair cracks, spalls, joints, and edges before application. Dynamic cracks and movement joints require separate detailing. Test existing coatings for adhesion and compatibility. Do not apply TUE to wet concrete, condensation, or active water intrusion; TUE is not a moisture-vapour mitigation system.
Mixing
Condition materials to the application temperature before use. Pre-mix Part A and add compatible pigment to Part A first when a pigmented coat is required. Add Part B at a 2:1 ratio by volume and mix mechanically for three to five minutes at low speed. Scrape the sides and bottom of the pail and avoid whipping air into the resin.
Do not thin with solvents. Use full kits or accurately measured partial kits. For deep-build or casting work, pour promptly after mixing and control the material mass to limit heat.
Application tools
Apply by squeegee, roller, notched squeegee, or gauge rake, then backroll to an even wet film while maintaining a wet edge. For broadcast systems, broadcast quartz, flake, or sand into the wet TUE at the specified rate and remove loose media after cure.
Finish and gloss
TUE cures glossy with a slight satin character from its additive package rather than a mirror-like, super high-gloss finish. Where a super high-gloss finish is required, ResinTech recommends CBE Core Bond Epoxy. Colour, clarity, and gloss can vary with film thickness, mass, temperature, substrate, and pigmenting method.
Limitations
- TUE is UV resistant, not a UV-stable aliphatic system. Under prolonged unprotected UV exposure, it can amber or lose gloss; topcoat with HPP or CRU for permanent exterior UV exposure.
- It is not a crack-bridging membrane and is not intended for active cracks, moving joints, or structural movement.
- It is not a waterproofing membrane or moisture-vapour mitigation system.
- Deep pours are for experienced installers only. Do not attempt large-volume casting without a mock-up and heat-control plan.
- Do not apply to wet, frozen, contaminated, dusty, or condensing substrates.
- For severe chemical service, protect TUE with a CRU topcoat and confirm against the TDS.
Frequently asked questions
What systems is TUE used in?
TUE is the premium epoxy reinforcement and build layer in ResinTech traffic systems such as PTS, VTS, and EWS, where it may be substituted for CBE. It is also the epoxy build layer in flake, quartz, metallic, and solid-colour floor systems. Confirm the system design against the current ResinTech TDS.
Does TUE yellow under UV exposure?
TUE is more UV resistant than ordinary epoxies and resists yellowing better than standard epoxy, but it is not a UV-stable aliphatic system. For long-term colour stability in UV-exposed or exterior applications, use a compatible UV-stable aliphatic topcoat such as ResinTech HPP, TCU, or CRU. Confirm system suitability against the current TDS.
Can TUE be used on exterior surfaces?
TUE may be used in interior and protected exterior assemblies. For permanent, unprotected exterior UV exposure, specify a UV-stable aliphatic topcoat over it. Confirm suitability against the current TDS and project specification.
How do I get a super high-gloss finish?
TUE cures glossy with a slight satin character. For a mirror-like, super high-gloss result, ResinTech recommends CBE Core Bond Epoxy. Confirm finish expectations against the current TDS.
Where can I buy ResinTech TUE in BC?
ResinTech TUE is stocked at Canopus Supply in North Vancouver and is available for pickup or delivery across British Columbia. Call 250-233-3000 to confirm stock or arrange a volume order.
Technical documentation
Use the Technical Data Sheet and Safety Data Sheet buttons near the top of this page to open the current PDF documents. Safety documentation for Parts A and B is available through Canopus Supply. Confirm every value against the current TDS and SDS before specifying or ordering.
Trade purchasing note
All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, system compatibility, substrate condition, pickup timing, and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.
Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility, and final performance remain the responsibility of the purchaser, installer, project specifier, and/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification, and site conditions before use.
Order enquiries and volume orders
ResinTech does not sell this product directly through this website. Current pricing, stock, volume orders, pickup timing, and delivery across BC are handled by Canopus Supply.
- Call: 1 (250) 233-3000
- Email: order@canopussupply.com
- Pickup: Unit 103, 185 Forester Street, North Vancouver, BC
Canopus Supply Inc. is an authorized ResinTech distributor serving Metro Vancouver and British Columbia.